The 844 ELITE™ Uneven Bars are FIG approved and can accommodate safety mats up to 20 cm.
 

 - High bar adjusts in height
   from 2350 to 2650mm

 - Low bar adjusts 1550 to
   1850mm

 - Exceeds FIG bar to bar width
   specifications, adjusts 80
   to 180cm

 - Heavier duty pistons for added
   stability

 - Easier to adjust, stronger
   cabling system

 - Graphite X bars provide flex and feel for maximum performance

 - Dual snap and spin lock systems provide optimum height accuracy
   and security

 - Dual slide collars allow width adjustment from 39-3/8" to 69"
   (100 - 175cm) at FIG height

 - Bases and assembly links finished in powder coated navy blue

 - Unit requires four (4) floor plates not included

ELITE™ Apparatus Pads
416-369 ELITE™ Uneven Bar Upright Pads

Protective blue pads for apparatus uprights ELITE™ (Not shown)
 

UTB-644 CLASSIC™ Uneven Bars
406-070 CLASSIC™ Uneven Bars

The UTB-644 CLASSIC™ Uneven Bars meet FIG, USAG, NCAA and NFHS specifications, when used with 12 cm mats.
 

 - High bar adjusts in height
   from 2250 to 2450mm

 - Low bar adjusts 1450 to
   1650mm

 - Easier to adjust, stronger
   cabling system

 - Dual snap and spin lock
   systems

 - Slide collars allow width adjustment from 24" to 67" (60-163cm)

 - Requires four (4) floor plates, not included

 - Bases and assembly links finished in powder coated classic blue

UTB-644-P CLASSIC™ Uneven Bars
406-370 CLASSIC™ Uneven Bars

The UTB-644-P CLASSIC™ Uneven Bars meet FIG, USAG, NCAA and NFHS specifications, when used with 12 cm mats.
 

 - High bar adjusts in height
   from 2250 to 2450mm

 - Low bar adjusts 1450 to
   1650mm

 - Easier to adjust, stronger
   cabling system

 - Dual snap and spin lock
   systems

 - Width adjustments only at 160, 140, 110 and 100 cm

 - Dual locking spin and snap lock mechanisms

 - Requires four (4) floor plates, not included

 - Uprights, bases and assembly links finished in powder coated classic
   blue

FSU-844-A Free Standing Uneven Bar Adapter
407-340 Free Standing Uneven Bar Adapter

Designed to work with both the 800 and 600 series uneven bars, where floor plate installation is not possible.
 

 - Improved leg reaches
   each utilize six
   15 gallon capacity
   water tanks

 - Weights sit on special 
   rubber footed bases,   
   providing maximum
   stability and a near 
   cable-type 
   performance 

100 Series Uneven Bars
405-117 Uneven Bars
405-018 Uneven Conversion Kit for 405-116 Parallel Bars

Designed for recreation only in elementary physical education programs by children under 85 lbs (39 kg).
 

 - Round graphite bars

 - Powder coat blue finish

 - Non-marking rubber
   foot pads

 - High bar fixed at 71" (1775 
   mm) above the floor

 
 - Low bar adjusts from 45" to 77" (1125 to 1925 mm)

 - Space between bars adjusts to 14", 16", and 18"
   (350, 400, and 450 mm)

SRS System*
407-078 SRS System
407-890 SRS Pads - Set of four

The Space Reduction Stabilizer System (SRS) decreases by 29% the required space for the uneven cabling system. Uses a 152" x 160" (386 x 400cm) area.

 - Round graphite bars

 - Powder coat blue finish

 - Non-marking rubber
    foot pads

 - Includes fourteen (14)
   concrete only installation
   anchors

 - Allows use of standard 
   uneven bar, including 
   standard cable assemblies

 - Features dual adjustment
   with cable tighteners, plus
   adjusting tensioning braces 

 - *Patent Pending

U-Base 645
407-415 U-Base Uneven Bars

Design saves over 60% of the floor space needed for conventional uneven bars.
 

 - Approved by the USAG
   and NFHS for com -
   petition

 - Requires four (4) floor
   plates (not included)

 - Requires a space of 157"
   wide by 91" long
   (399 x 323 cm)

 - Unit combines the UTB-644 CLASSIC™ uneven bars with special
   U-bases

U-Base SBT (Women) Quick Release
407-450 U-Base SBT (Women) Quick Release

Designed with quick release pins to allow rapid change over to a men's
SBT.
 

 - Includes one Graphite
   X bar

 - Unit requires four (4)
   floor plates (not included)

 - Height adjusts from 44" to 91
   - 1/2" (112-232cm) in 200
   mm increments, and from 91
   - 1/2" to 99 - 1/4" (232-
   252cm)

Mount Trainer
416-030 Mount Trainer

This unit is specifically designed to aid beginning gymnasts in practicing their mounts.
 

 - Light weight, but will not
   compress

 - Dual density foams provide
   a soft springy take-off

 - Cover is 18 ounce
   black vinyl

 - Size 24" x 48" x 9"
   (61 x 122 x 23cm)

 - Not to be used as a springboard

Adjustable Single Bar Trainer-Women
407-639 SBT-319 Single Bar Trainer
 

Recommended for training only.

 - Includes a Graphite X bar

 - Requires six (6) floor
   plates (not included)

 - Height adjusts from 43 - 1/4" to 90 - 1/2" (1100 to 2300mm) in 200mm
   increments, and from 90 - 1/2" to 106 - 1/4" (2300 to 2600mm) in 50mm
   increments

Spotting Platform
407-003 Spotting Platform
 

Designed for use on AAI single bar trainers only.

 - Adjustable in height

 - Locks into place on upright
   with spin lock assembly

 - Can be rotated out of
   working area when not needed

 - Platform surface is 19 - 1/8" x 12 - 3/4" (49 x 32cm)

Multiplex IV Training System
407-234 Multiplex IV- No Rails
407-437 Multiplex IV- With 4 Graphite X Rails
407-438 6' (1.8m) Training Rail Only
407-439 8' (2.4m) Training Rail Only

A multi-level training system that enables the instructor to observe four stations at once, excellent for development programs.
 

 - Includes a
   Graphite X bar

 - Requires six (6)
   floor plates
   (not included)

 - Height adjusts from 43 - 1/4" to 90 - 1/2" (1100 to 2300mm) in 200mm
   increments, and from 90 - 1/2" to 106 - 1/4" (2300 to 2600mm) in 50mm
   increments

Graphite X Uneven Bar
407-152 Graphite X Bar - Each
 

Approved for use in FIG, USAG, and NCAA competitions

 - High-tech manufacturing process
   utilizes a graphite and fiberglass
   composite

 - Bar provides flexibility and strength
   that meet the FIG deflection
   specifications

- 40mm diameter round bar is 240 + 1
   cm length between the pivot points

Cable Tighteners
407-056 Standard Cable Tightener - Each
407-055 Standard Cable Tightener - Set of Four
407-116 Deluxe Cable Tightener - Each
407-115 Deluxe Cable Tightener - Set of Four

American offers 2 different styles of uneven tension bar cable tighteners.
 

 - Fits all models of American unevens

 - Pulleys are on 6" (15cm) centers

 - Top of the line model fits all of
   American's unevens

 - Pulleys are on 6" (15 cm) centers

Quick Release Conversion Kit
407-360 Quick Release Conversion Kit

Includes one pair each of collars and locking quick release pins to fit AAI single bar trainers.
 

 - Fits American SBT models
   407-450, 407-625 and
   407-639

Uneven Conversion Kits

Converts American's 160 model unevens installed on American risers, and 170 models.
 

 - Allows the high bar to adjust from 2350 to 2650mm in height

 - Low bar adjusts from 1250 to 1850mm

407-120 160 Standard Conversion Kit (Before 1998)
(4 Pistons and 4 Standard Swivel Anchors)

407-121 160 Standard Conversion Kit (Before 1998)
(4 Pistons and 4 Deluxe Swivel Anchors)

407-130 170 Standard Conversion Kit (1998 - 2000)
(4 Pistons and 4 Standard Swivel Anchors)

407-131 170 Standard Conversion Kit (1998 - 2000)
(4 Pistons and 4 Deluxe Swivel Anchors)

UTB Width Conversion Kits
407-166 UTB 160 cm Conversion Kit with spin and snap locks
407-167 UTB 160 cm Conversion Kit w/o spin and snap locks

407-190 UTB 160 cm Wide Base Conversion Kit with spin and snap locks and one (1) meter bases

Includes two adjustable spreader bars. Only good on American UTB models with adjustable back uprights.
 

 - Allows the removal of low bar
   for training purposes

 - Comes complete with
   anchoring bolts

U-Base Uneven Front Braces
407-425 Uneven Front Cylinder Braces - U Base
 

Front cylinder braces for U-Base uneven units.

 - Allows the removal of low bar
   for training purposes

 - Comes complete with
   anchoring bolts

U-Base Kit
407-419 U-base UTB Kit with Swivel Anchors

Transform your AAI wide base unevens to space saving U-Base UTB.
Not for use on ELITE™ or CLASSIC™ models. (Not Shown)
 

 - Includes base packages and rigging

 - Requires four (4) floor plates, not included

UTB Height Adapters
407-371 UTB Height Adapters for 407-370 and 407-470 models
407-325 U-Base Height Adapters for 407-315 and 407-415 models

Approved for NCAA for competition. Pair of adapters increase height of American's UTB's or free standing uneven adapters by 4 13/16"
(122mm). Not compatible with ELITE or CLASSIC series UTB's.